GC10D CV5143 (ETL)
Dekatron counting tube

Bi-directional single-pulse decimal counting tube.
Argon
filled.







The following pictures show the tube spinning.
Of course, only one of the cathodes is glowing, but the opening time of the camera leads to that different pictures:

a long opening time of the camera:

a short opening time of the camera:

by night, with  long opening time of the camera:

An animation of a spinning dekatron (neon filled, colour not like the GC10D!):

German English    
Röhrentyp Tube type   GC10D CV5143
Hersteller Brand   ETL
Vergleichstypen Substitutes   CV5143, GC10D
Zähl-Richtung Counting direction   bidirectional
Arbeitsweise Operation   single pulse
Art Sort   counting tube
Sockel Base   K8A
Fassung Socket   K8A
Nullposition Zero position   Pin 6
Zähl-Schritte Counting steps   10
Anzahl der Hilfskathoden Number of guides   3
Gasfüllung Gas filling   Argon
Röhrendurchmesser maximal Tube diameter max. mm 32.5
Röhrenhöhe maximal Tube height max. mm 103.25
       
max. Zähl-Geschwindigkeit Max. counting speed kHz 20
Betriebsspannung minimal Supply volt. min. V 420
Betriebsspannung typisch Supply volt. typ. V 475
Brennspannung typisch Maintaining voltage typ. V 215
Anoden bzw. Kathodenstrom min. Anode/cath. current min. µA 700
Anoden bzw. Kathodenstrom typ. Anode/cath. current typ. µA 800
Anoden bzw. Kathodenstrom max. Anode/cath. current max. µA 1200
Netzteil Leistung minimal Power supply power min. mW 380
Anodenwiderstand typisch Anode resistor typical 330
Spannungsdifferenz zw. 2 Kath. max. Voltage between 2 cathodes max. V 180
Hilfskathodenvorspannnung minimal Guide bias volt. min. V 60
Hilfskathodenvorspannnung Impulsbetrieb typ. Guide bias typ pulse op. V 72
Hilfskathodenvorspannnung Sinusbetrieb typ. Guide bias typ sine op. V 12
Hilfskathodenvorspannnung maximal Guide bias volt. max. V 84
Hilfskathodenimpulsspannung Guide signal voltage pulse Vp -144/+50/-12 (-144 ±12)
Hilfskathodenimpulsspannung eff. (Sinus) Guide signal voltage eff. (sine) Veff 50-80
Hilfskathodenimpulsdauer minimal Guide signal pulse duration min µs 25
Kathodenwiderstand typisch Cathode resistor typical 82
Resetimpulsspannung Reset pulse voltage min. V -140
       
Anschlussbelegung: Pinout:    
PIN 01 PIN 01   K1-9
PIN 02 PIN 02   G3
PIN 03 PIN 03   G1
PIN 04 PIN 04   A
PIN 05 PIN 05   NC
PIN 06 PIN 06   K0
PIN 07 PIN 07   G3 out
PIN 08 PIN 08   G2

Pinout & Outline:

Downloads/Datasheets:

Sie finden passende Datenblätter im Datenblattarchiv.
Suchen sie dort nach dieser Type und deren Vergleichstypen.

You'll find the matching datasheets in the datasheet archive.
Search for this type and its substitutes there.


Back to Dieter's Nixie Tube Page

eMail to Dieter
Impressum & Datenschutz