Z562S (RFT)
Dekatron counting tube

Bi-directional double-pulse decimal counting & selector tube
.
Neon filled

 The following pictures show the tube spinning.
Of course, only one of the cathodes is glowing, but the opening time of the camera leads to that different pictures:

a middle opening time of the camera:

a short opening time of the camera:

a long opening time of the camera:

by night, with  long opening time of the camera:

An animation of a spinning dekatron:

German English    
Röhrentyp Tube type   Z562S
Hersteller Brand   RFT
Vergleichstypen Substitutes   -
Zähl-Richtung Counting direction   bidirectional
Arbeitsweise Operation   double pulse
Art Sort   counting & selector tube
Sockel Base   B13B
Fassung Socket   B13B
Nullposition Zero position   Pin 1
Zähl-Schritte Counting steps   10
Anzahl der Hilfskathoden Number of guides   2
Gasfüllung Gas filling   Neon
Röhrendurchmesser maximal Tube diameter max. mm 30.1
Röhrenhöhe maximal Tube height max. mm 60.1
       
max. Zähl-Geschwindigkeit Max. counting speed kHz 4-5
Betriebsspannung minimal Supply volt. min. V 375
Betriebsspannung typisch Supply volt. typ. V 450
Brennspannung typisch Maintaining voltage typ. V 190
Anoden bzw. Kathodenstrom min. Anode/cath. current min. µA 250
Anoden bzw. Kathodenstrom typ. Anode/cath. current typ. µA 350
Anoden bzw. Kathodenstrom max. Anode/cath. current max. µA 550
Netzteil Leistung minimal Power supply power min. mW 158
Anodenwiderstand typisch Anode resistor typical 750
Hilfskathodenvorspannnung minimal Guide bias volt. min. V 10
Hilfskathodenvorspannnung Impulsbetrieb typ. Guide bias typ pulse op. V 40
Hilfskathodenvorspannnung Sinusbetrieb typ. Guide bias typ sine op. V 10
Hilfskathodenvorspannnung maximal Guide bias volt. max. V 35
Hilfskathodenimpulsspannung (Rechteck) Guide signal voltage rectangle Vp -100
Hilfskathodenimpulsspannung eff. (Sinus) Guide signal voltage eff. (sine) Veff 40-70
Hilfskathodenwiderstand maximal Guide resistor max. 120
Kathodenpotential inaktive Kath. Cathode pot. non cond. V -20
Ausgangsspannung Output voltage V 35
Resetimpulsspannung Reset pulse voltage min. V -120
       
Anschlussbelegung: Pinout:    
PIN 01 PIN 01   Guide 1
PIN 02 PIN 02   Anode
PIN 03 PIN 03   Cathode 0
PIN 04 PIN 04   Cathode 9
PIN 05 PIN 05   Cathode 8
PIN 06 PIN 06   Cathode 7
PIN 07 PIN 07   Cathode 6
PIN 08 PIN 08   Guide 2
PIN 09 PIN 09   Cathode 5
PIN 10 PIN 10   Cathode 4
PIN 11 PIN 11   Cathode 3
PIN 12 PIN 12   Cathode 2
PIN 13 PIN 13   Cathode 1

Outline & Pinout:

Downloads/Datasheets:

Sie finden passende Datenblätter im Datenblattarchiv.
Suchen sie dort nach dieser Type und deren Vergleichstypen.

You'll find the matching datasheets in the datasheet archive.
Search for this type and its substitutes there.


Back to Dieter's Nixie Tube Page

eMail to Dieter
Impressum & Datenschutz